| Engine | |
|---|---|
| Engine Manufacturer | Kawasaki |
| Horse Power | 34.5 hp |
| Engine Type | Kawasaki FX820 EVO (822cc) |
| Transmission | PARKER HTG 12CC PUMP / 310CC WHEEL MOTOR |
| General | |
| Ground Speed | 10mph |
| Fuel Capacity | TWIN 7.45 GAL. Tanks |
| Deck | |
| Deck Size | 54 in. |
* Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.
-
The Cub Cadet® PRO X 654 EFI 54-in. 34.5 HP* Commercial Stand-On Lawn Mower With EFI Engine features a fully fabricated 10-gauge steel commercial deck shell with top, bottom and side reinforcements. Standard 24-in. tires are designed to give you ground clearance to easily hop on curbs. A large, fully adjustable suspension platform is engineered to allow you to glide comfortably through tough terrains.
- A fully fabricated 54-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
- A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
- High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series EFI
- Engine Model Number 820 EVO
- Engine Displacement 822cc
- Engine Output 34.5HP
- Starter Type Electronic
- Fuel Tank Capacity 7.5 gal. US (28.4 L)
- Cylinders Twin
- Engine Start Ignition Key
- Engine Oil Capacity 2.0 qt. US (1.89 L)
- Lubrication Fully pressurized
- Charging System 15 amp regulated
- Fuel Gauge No
- Choke Auto-Choke
- Air Filter High Density
- Oil Filter Yes
- Fuel Delivery Electronic Fuel Injection (EFI)
Drive System
- Transmission 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
- Forward Speed 10 mph / 16 km/h
- Reverse Speed 5 mph / 8 km/h
Cutting Deck
- Deck Cutting Width 54 in
- Deck Material 10-gauge steel
- Deck Engagement (PTO) Electronic with quick reset
- Deck Construction 10 ga shell w/ 7 ga top & bottom reinforcement
- Spindle Construction HD 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft and maintenance-free design
- Blade(s) Three 19" long high-lift Marbain blades, 1-1/2" of blade overlap
- Deck Lift Hand lever adjusting spring lift, pin selector for height
- Cutting Height Range 1” to 5” in 1/4” increments
- Anti-Scalping 2 front deck gauge wheels
Chassis
- Frame 2" x 3" full-length tube frame
- Front Axle 2" x 3" tube construction
- Front Caster Mount 3/8" thick steel
- Suspension Hand lever adjust, 3-position spring suspension foot platform
Controls
- Cruise Control NA
- Brakes Hand lever control / external band
- Steering Control Lap Bar Steering Wheel Control
Wheels
- Rear Tires 24"x12"-12"
- Front Tires 13x5-6" Reliance Run Flat carlisle
Dimensions
- Weight (approx.) 1080 lbs
