| Engine | |
|---|---|
| Engine Manufacturer | Kawasaki |
| Horse Power | 23.5 hp |
| Engine Type | FX series FX730v |
| Displacement | 726cc |
| General | |
| Transmission | Two Hydro Gear - ZT 3400 transmissions with Charge Pumps |
| Wheel Size | Front: 13 in. x 6.5 in. - 6 in.; Rear: 23 in. x 10.5 in. - 12 in. |
| Fuel Capacity | Twin tanks - 3.5 gal. ea. (7 gal. total) |
| Deck | |
| Deck Size | 60 in. |
| Discharge Type | Side; Optional: Mulch |
* Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.
Key Features
- 23.5 HP Kawasaki FX Series (726cc)
- 60" commercial-grade sloped-nose fabricated deck
- 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Steering
- Lap Bar / Steering Wheel Adjustment: Multi-position Quick-adjust steering column
- Lap Bar / Steering Wheel Control: High Performance Steering Wheel & Foot-pedal Control
Engine
- Fuel Capacity: Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening
- Manufacturer / Type: Kawasaki FX series FX730v
- Horsepower / CC's: 23.5hp - 726cc
Warranty
- Warranty: 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Controls
- Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
- Park Brake / Braking: Foot operated pedal
- PTO Clutch: Warner Clutch - 125 ft lb.
- Cup Holder: Integrated into Side Pod
- Cruise Control: Standard - Foot operated pedal engagement
Chassis
- Front Axle / Yolks: 2" x 3" Axle Tube 3/8" thick steel front yolks
- ROPS: 2"x2" Foldable 3 Position Low Profile Clearance
- Frame: Fully welded, full-length 12ga. channel frame with 14ga. reinforcements
- Rear Bumper: 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
Mower Deck
- Top Reinforcement(s): 2ga. (.250") top plate
- Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard
- Spindle Covers: Steel - Tooless Quick Release
- Deck Size/Type: 60" FABRICATED DECK
- Deck Material: Fully welded 10ga. (.135") steel deck shell with reinforcements totaling .560"
- Discharge Chute: Heavy-duty Flex chute (impact resistant)
- Bottom Reinforcement: 7ga. (.175") steel
- Deck Height Adjustment: Hand Lever / 15 posistion / spring assist
- Deck Blades: Triple-blade / High-lift blade (standard) Marbain Blade
- Cutting Height: 1" - 5"
- Blade-Tip Speed (Approx): 18,500 fpm
- Leading Edge Reinforcement: 1/4" (.250") steel
- Side Construction: 5/16"(.313) steel on trim and discharge sides
Electrical System
- Battery: 230 cold crank amp
- Safety Systems: Operator presence
- Alternator: 15 amp regulated
Additional Specifications
- Ground Speed: 9.5mph fwd. / 4.5mph rev.
- Transmission: Two Hydro Gear - ZT 3400 transmissions with Charge Pumps
- Seat Type: 2-tone High-back (EVC) Comfort Seat Dial Suspension, Seat Belt, Adj Arm Rests and 6 in. seat travel
- Front Tires: 13" x 6.5" - 6" (smooth)
- Rear Tires: 23" x 10.5" - 12" (Turf Master)
Dimensions
- Length / Width / Height discharge chute up width rop's up height: 80" L x 50" W x 58" H
- Weight (approx): 1060 LBS.